椭圆波导FEM放大器的非线性特性研究

 以椭圆波导、平板摇摆器为FEM放大器的模型，导出了自洽的注波互作用三维非线性方程组。在此基础上编制了相应的程序。利用该程序分析了FEM放大器的饱和功率、效率以及带宽等高频特性。考虑了摇摆器渐变、空间电荷波、电子初始速度零散对高频特性的影响。     

4种等温物态方程适用性的比较研究

 通过分析现有文献，认为4种两参数的物态方程在高压物理研究中较为流行，它们是Vinet、Baonza、Morse和Born-Meyer（BM）方程。将这4种方程用于拟合50种材料的实验压缩数据，得出了零压下压缩模量及其一阶压力导数的优化取值，并计算了4种方程的平均压力误差。结果表明，Morse方程的精度最高，对50种材料的平均拟合误差为0.557 6%；BM方程次之，平均误差为0.615 1%；Vinet和Baonza方程的误差大一些，分别为0.788 9%和0.833 3%。对8种典型材料计算了压力误差随压强变化的曲线，所得结果与平均误差的趋势一致，也是Morse方程的精度最高。在宽广压力范围的高压物态方程研究中，推荐使用Morse方程。     

伪随机编码超宽带短脉冲的探测能力研究

 为进行弱信号检测，研究在脉冲雷达中获得大信号时间宽度与信号带宽积的方法，利用伪随机编码方法调制超宽带短脉冲，可以在保持子脉冲信号带宽的情况下，以低功率发射长脉冲串类噪声信号，而提高信号的能量，提高探测距离。通过仿真实验得出，利用伪随机编码技术可以使超宽带信号具有更强的探测能力，可以在回波信号功率水平远远小于噪声水平（如信噪比5%）的情况下实现对探测目标的高保真成像。     

光学薄膜测量时平顶光束激励的表面热透镜理论模型

推导了调制的平顶光束激励下基于Fresnel衍射积分的表面热透镜理论，通过数值模拟，比较了平顶光束和高斯光束激励下样品内部温度场、表面形变场和探测光衍射信号的径向分布，分析了影响表面热透镜信号的实验参数.结果表明，在最佳探测位置，平顶光束激励下的表面热透镜系统比相同情况下高斯光束激励下的灵敏度高，最高时约2倍，更有利于薄膜吸收测量. 关键词： 表面热透镜 光学薄膜 平顶光束     

LaB6在低压强氮气和氦气中的放电特性

 研究了LaB₆在1~10 Pa氮气和氦气中的直流和脉冲放电特性以及放电过程对电极的影响。结果表明，电极直径为5 mm的LaB6氦气放电管在脉冲工作状态下可以长期稳定放电。在脉冲电压为2.2 kV、脉冲宽度10 ms、频率13.3 Hz下，脉冲峰值放电电流超过120 A。氦气放电管在放电过程中，阴极表面有离子的清洗和活化作用，可以使电极的表面逸出功降低，提高放电管的发射能力和稳定性。LaB₆作为气体放电电极具有寿命长、延迟时间短、放电电流大等优点，可用于重复强流脉冲气体放电的高压高速开关器件。     

Propagation of the kurtosis parameter of Hermite-cosh-Gaussian beams

Starting from the propagation equation of Hermite-cosh-Gaussian (HChG) beams and the intensity moments definition, an analytical expression for the propagation of the kurtosis parameter of unapertured HChG beams passing through paraxial optical ABCD systems is derived and illustrated numerically. Special interesting cases are discussed, in particular, the kurtosis parameter of HChG beams at the waist plane is obtained readily from our general propagation expression.     

厚胶光刻非线性畸变的校正

利用厚胶光刻技术制作大深度微结构元件是一种有效的途径,但厚胶光刻过程中的非线性畸变对光刻面形质量的严重影响限制了该技术的应用,基于此,提出了一种对掩模透射率函数进行校正的方法。分析空间像形成及其在光刻胶内传递、曝光、显影等过程中非线性因素的影响,利用模拟退火算法对掩模透射率函数进行校正,以提高光刻面形质量,并以凹面柱透镜为例,给出了校正前后的显影轮廓模拟结果,其校正后浮雕面形的体积偏差仅为2.63%。该方法在有效改善面形质量的同时,并没有引起掩模的设计、制作难度及费用增加,这对于设计、制作高质量的微结构元件有重要意义。     

激光二极管自混合干涉和微振动的实验观测

介绍了利用LabView软件虚拟示波器和信号源,对激光二极管自混合干涉和微振动进行的实验观测.该实验可以作为本科低年级学生的综合设计实验.     

Surface modifications of ITO electrodes for polymer light-emitting devices

Surface modifications were performed on the indium tin oxide (ITO) substrates for polymer light-emitting devices, using the different treatment methods including solvent cleaning, hydrochloric acid treatment and oxygen plasma. The influence of modifications on the surface properties of ITO electrodes were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle, and four-point probe. The surface energies of the ITO substrates were also calculated from the measured contact angles. Experimental results demonstrate that the surface properties of the ITO substrates strongly depend on the modification methods, and oxygen plasma more effectively improves the ITO surface properties compared with the other treatments. Furthermore, the polymer light-emitting electrochemical cells (LECs) with the differently treated ITO substrates as device electrodes were fabricated and characterized. It is observed that the surface modifications on ITO electrodes have a certain degree of influence upon the injection current, luminance and efficiency, but hardly upon the turn-on voltages of current injection and light emission which are close to the measured energy gap of electroluminescent polymer. Oxygen plasma treatment on the ITO electrode yields the better performance of the LECs, due to the improvement of interface formation and electrical contact of the ITO electrode with the polymer blend in the LECs.     

Matrix representation of three-dimensional astigmatic resonators

Three-dimensional astigmatic resonators, typical examples of which are the resonators bounded by cylindrical-spherical mirrors and cylindrical-cylindrical mirrors oriented at an arbitrary crossed angle, are investigated in detail by using a complex curvature tensor concept and generalized tensor ABCD law. Computerized numerical calculations illustrate some interesting characteristics of these astigmatic resonators.